Product Description
Glazed Tile Roofing Machine and Trapezoidal Roof Roll Forming Machine could make into a Double Layer Roll Forming Machine. The speed of Glazed Roll Forming Machine is 4m/min and speed of Roof Tile Trapezoidal Equipment is 15m/min. The voltage of Roll Forming Machine could be required by client. With machine, we could provide a Uncoiler Machine for free. If you need hydraulic decoiler for positive feeding, pls tell us. We will quote together.
Botou Xianfa Roll Forming Machine Factory was established since 1996. We are a roll forming machine manufacturer, our products include IBR roof sheet roll forming machine, corrugated profile machine, glazed tile forming machine, double layer roll forming machine, gutter machine, downpipe forming machine, ridge cap making machine, arching sheet machine, floor deck making machine, roller shutter door forming machine, barrel profile forming machine, and so on.
|
No.
|
Africa Roll Forming Machine, Forming Profile Machine, Glazed Iron Sheet Roll Forming Line
|
|
1
|
Suitable to process
|
color steel sheet; galvanized sheet, zinc sheet
|
|
2
|
Width of the plate
|
1250mm
|
|
3
|
Rollers
|
up layer: 12rows; down layer: 11rows
|
|
4
|
Dimensions
|
8000*1550*1910mm
|
|
5
|
Power
|
5.5+5.5KW
|
|
6
|
Thickness of the plate
|
0.3-0.6mm
|
|
7
|
Productivity
|
up layer: 0-5m/min; down layer: 8-15m/min
|
|
8
|
Material of the cutting blade
|
Cr12
|
|
9
|
Diameter of the roller
|
70mm
|
|
10
|
Weight
|
About 3.6T
|
|
11
|
Voltage
|
380V 50HZ 3phases
|
|
12
|
Control System
|
PLC control
|
Industrial Process And Component Specification
Component Specification
1. Manual Uncoiler:
Usage: It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand.
Loading capacity: 5T
Inner diameter: 500-508mm
2. Feeding Table:
Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat. Parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3. Main Roll Forming Machine:
Material of rollers: 45# steel, roller surfaces polishing, hard plating. The polished surface and the heat treatment towards the molds also can keep the molding. Plate surface smooth and not easy to be marked when it is being stamped
4. Hydraulic System:
Power: 11KW, Hydraulic oil:40#.
Hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job.
5. Shearing Mechanism: It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12, quenching treatment.
6. Computer Control Cabinet: The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use. Plc: EURA
Packaging
& Shipping
Botou Xianfa Roll Forming Machine Factory
Welcome to contact with me
.png)
Contact Now
